组合回转壳体动力分析的混合界面法

组合回转壳体在工程结构系统中大量存在,对它们进行动力分析是十分必要的。介绍了混合界面法的主要原理和在组合回转壳体结构系统动力分析中的应用,并用两个例题作了分析和计算,证明是成功的。该方法可推广到其它复杂系统结构的动力分析。     

转动算符表示矩阵的计算

利用量子体系态空间基矢的完备性,通过表象变换,直接计算出转动算符∧D(α,β,γ)在{∧J~2,∧J_z}表象中的矩阵表示.该方法简单而有效.     

NORX算法中非线性组件的移位参数选取准则研究

NORX算法是进入凯撒竞赛第三轮的15个认证加密候选算法之一,该算法的唯一非线性组件由异或、与和移位操作组成。从非线性逼近和循环分析两个密码学性质研究移位参数的选取准则,证明了可变移位函数的非线性逼近概率为三值函数,并得到了移位参数取1时具有最佳的非线性逼近性质;给出了可变移位函数的循环概率表达式,并证明了对于任意非零的移位参数其最大循环概率均相同。由上述分析结果可知,NORX算法中非线性组件的移位参数取1时达到了最佳的非线性逼近和循环性质。该结果可应用于NORX算法的安全性分析中,同时也能为设计类似算法提供理论指导。     

扭转约束对无防火保护钢柱抗火性能影响分析

应用ANSYS软件计算了钢柱在标准升温模式下的温度场,然后利用ANSYS的耦合分析模块,将温度场导入结构分析,分析了不同约束下轴心受压钢柱在温度升高时的力学反应,同时考虑了荷载比以及长细比对不同约束钢柱抗火性能的影响.研究表明:扭转约束钢柱的抗火性能要优于柱端没有扭转约束的简支柱;当钢柱长细比系数在30以内时,扭转约束...     

THE FRAGILE TRADITION OF NUCLEAR RESTRAINT

The Tradition of Non-Use of Nuclear Weapons by T.V. Paul. Stanford University Press, 2009. 319 pages, $29.95.     

弹体旋转角速度的测量

本文研究了弹体旋转角速度测量的机理,采用极化栅网,使弹体的反射信号包含有弹体的旋转角速度信息,并且通过实验予以证明。文中提出了一种旋转角速度测量系统。本文对测量弹体旋转角速度是有一定帮助的。     

Effect of tool rotational speed on the particle distribution in friction stir welding of AA6092/17.5 SiCp-T6 composite plates and its consequences on the mechanical property of the joint

This study investigates the effect of tool rotational speed (TRS) on particle distribution in nugget zone (NZ) through quantitative approach and its consequences on the mechanical property of friction stir welded joints of AA6092/17.5 SiC_p-T6 composite. 6 mm thick plates are welded at a constant tool tilt angle of 2° and tool traverse speed of 1 mm/s by varying the TRS at 1000 rpm, 1500 rpm and 2000 rpm with a taper pin profiled tool. Microstructure analysis shows large quantity of uniformly shaped smaller size SiC particle with lower average particle area which are homogeneously distributed in the NZ. The fragmentation of bigger size particles has been observed because of abrading action of the hard tool and resulting shearing effect and severe stress generation due to the rotation of tool. The particles occupy maximum area in the matrix compared to that of the base material (BM) due to the redistribution of broken particles as an effect of TRS. The migration of particles towards the TMAZ-NZ transition zone has been also encountered at higher TRS (2000 rpm). The microhardness analysis depicts variation in average hardness from top to bottom of the NZ, minimum for 1500 rpm and maximum for 2000 rpm. The impact strength at 1000 rpm and 1500 rpm remains close to that of BM (21.6 J) while 2000 rpm shows the accountable reduction. The maximum joint efficiency has been achieved at 1500 rpm (84%) and minimum at 1000 rpm (68%) under tensile loading. Fractographic analysis shows mixed mode of failure for BM, 1000 rpm and 1500 rpm, whereas 2000 rpm shows the brittle mode of failure.